Our Pioneered technology enables you to save on your Soldering cost by upto 50% by using our formulated Anti-Dross Powder.
This Powder solutions help to reduce dross formation over solder by cutting the contact of solder with Air thus reducing oxidation. The Dross formed afterwards will be light in weight and less in quantity.
Sprinkle 1 to 2 gm of Powder on your melted Solder in Soldering Dip Machine (Pot).
Note that Solder should be in liquid state and it works best when it is thermostat or Digital solder pot as temp. will be well maintained in them.
Before sprinkling make sure that dross on the melted solder is removed (if any). The powder will form a layer over the melted solder and protect the solder from Oxidation.
If properly used ,it can recover 80% of the metal.
| Physical State : | Powder |
| Specific Gravity : | 2 @ 25*C |
| Flash Point : | 301*C (Melting Point) |
| Boiling Point : | NA |
| pH (5% Solution) : | 9.8 |
| Color : | White |
The Wave oil is used in large soldering pots/machine like Wave Machines with large surface area.
It is a thermally stable hydro-carbon compound with dross inhibitive properties, it is used in still portion of solder pots and in automatic wave soldering machine. It acts as a pot blanketing system to inhibit dross, provide longer pot life,reduce surface tension between Solder and PCB as well as to minimize fuming.
| Physical State : | Viscous Liquid |
| Specific Gravity : | 0.91 @ 25*C |
| Flash Point : | 280*C (Open Cup) |
| Boiling Point : | 170*C |
| pH (5% Solution) : | 6.5 |
| Color : | Dark Brown |
Industrial Area, Plot No. B-39/6, Site-4,
Sahibabad, Ghaziabad, Uttar Pradesh, 201010
bicsolder07@yahoo.in , enquiry@bicsolder.com
09911314567,
09911135970
